[SOLD] Mopar Performance 360 Cast 4.0" Stroker Crank – Used

-
Status
Not open for further replies.

Rocket

FABO Gold Member
FABO Gold Member
Joined
Apr 22, 2005
Messages
2,801
Reaction score
834
Location
U.S.A.
Rating - 100%
136   0   0
Contact seller
I have a nice used Mopar HD 4.0 stroke, 360 main, cast crankshaft part number P5007258. Crankshaft is in nice used shape and was new when installed in a bracket car. Journals are standard dimensions. Some deburring was performed on the throws and other areas as you can see in some of the photos. This crankshaft was used for two seasons and have gone another direction. Crank shows some typical marking for being used. Most marks are not able to be felt with a fingernail. A couple you can slightly feel it.

Price is $275 plus shipping.

P1050670.JPG
P1050671.JPG
P1050678.JPG
P1050680.JPG
P1050684.JPG
P1050685.JPG
P1050686.JPG
P1050687.JPG
 
I have the same rods as used but a new set. They are in a different add. Eagle H-Beam. The used rods were sold. I have the used pistons as well. They are KB 744 30 oversized
 
I have the same rods as used but a new set. They are in a different add. Eagle H-Beam. The used rods were sold. I have the used pistons as well. They are KB 744 30 oversized

How much for the crank and pistons together shipped to 30043? Thx
 
Compression with a flat top piston with 6.6 cc valve reliefs, 62 cc chambers, 0.040" gasket with 0.00 deck height is ~ 11.8.
 
I also have the damper for the crankshaft for an extra fee. Removable weight so it can be retained for use with an externally balanced assembly or removed for use with an internally balanced assembly. Summit part # SUM-B64278.

P1050719.JPG
P1050723.JPG
 
Status
Not open for further replies.
-
Back
Top