dirt circle track alignment settings needed

!/4-3/8 toe out to start can go as high as 1/2". RF castor 3.5 to 5*Positive LF castor 1to2 deg..positive. RF camber 3 to 5 deg neg (top leaning in.) You can space the lower balljoint/spindle with washers to get this.. LF camber as much as you can get out of it up to 5* positive(top lean out) I have ground down the pads on the spindle to pull the bottom in. also offset upper bushings installed to make upper as long as possible. Good luck
I just noticed you have manual steering. you may have to reduce the castor settings to reduce effort. I hope you are usesing the 16-1 box. if not there is know way your going to keep up with the steering inputs. even then its going to be tough. HIGHLY recommend power steering.