Rust bucket barracuda

-

LITTLE LUKE

Active Member
Joined
Mar 9, 2020
Messages
42
Reaction score
14
Location
JERSEYVILLE,IL
These are some photos of 1964 barracuda I'm restoring

20200211_154251.jpg


20200212_173848.jpg


20200212_173857.jpg


20200213_142740.jpg


20200221_092936.jpg


20200221_174435.jpg


20200307_113443.jpg


20200307_113449.jpg


20200307_113501.jpg


20200307_113643.jpg
 
Looks like a challenge, but a good one!
 
So far so good, looks like you've still got a ways to go! 65'
 
having to fab a lot of panels but enjoying every minute trunk lower extensions outer wheel house rocker panel fender lip inengine compartment am replacing all rusted metal even if i have to make it have metal stomp shear bead roller planishing hammer shrinker/stretcher metal box break and a farm shop
 
having to fab a lot of panels but enjoying every minute trunk lower extensions outer wheel house rocker panel fender lip inengine compartment am replacing all rusted metal even if i have to make it have metal stomp shear bead roller planishing hammer shrinker/stretcher metal box break and a farm shop
FYI...I have almost all those pieces you are making in this post
 
Do you have good outer wheelhouse both sides pretty much the rest I have made of what do you want for them
 
The good thing is, once you get one down "that far" you can do anything to it.
 
click on my profile (the picture of my car) in this reply...a black box will appear. click on start a conversation. these are private messages only you and I can see!
 
Do you have good outer wheelhouse both sides pretty much the rest I have made of what do you want for them
Post up what you need on this site in the "wanted" section, there are several members with good parts that you could use. I have parts that have already been pulled, prepped and primed and are ready to go!
 
Last edited:
-
Back
Top