Do They Make A relocation block for M/C For The Early A's

It will physically fit, but I can't vouch for the offset with your booster setup, if it will move it too far over and into your inner fender apron. These are based on the units used on the '68 SS Darts and Barracudas to clear the v/c of the hemi, thus their designation in the catalogs. Just remember if you use one, it also spaces the mc & booster farther out from the firewall, and you could run into brake push rod length issues. Plan wisely. Many factory sb valve covers were dimpled at the rear to provide more clearance, but not all. If yours are not, it may be easier to find another set of vc s and swap those on.