Budget Rocker choice
LMAO! YES!
The head itself is fine. Once you start playing with the Dimensions of the parts being used, you start running into issues. Another good example of the milled heads is that I had to mill my intake .070 on the intake to head surfaces. The bottom of the intake is very close to the blocks China wall.
This particular block is not milled but the heads were. An amount I have forgotten long ago. That is less than a 3/16 gap. Mill the block & heads enough, that will disappear and the intake will have to be milled more as well as the bottom of it.
LMAO! YES!
The head itself is fine. Once you start playing with the Dimensions of the parts being used, you start running into issues. Another good example of the milled heads is that I had to mill my intake .070 on the intake to head surfaces. The bottom of the intake is very close to the blocks China wall.
This particular block is not milled but the heads were. An amount I have forgotten long ago. That is less than a 3/16 gap. Mill the block & heads enough, that will disappear and the intake will have to be milled more as well as the bottom of it.
