Is this a fair radiator?
Here is what Chrysler says about pump speed. They want the water pump turning 20% faster than the crank for maximum cooling. I suggest you get as close to that as possible. I’m only 6% overdriven, but I’m working on getting it to 20%.
You have a 6.75 inch water pump pulley. To get to 20% overdriven, you’ll need a crank pulley that is 8.10 in diameter.
At 10% over you’ll need to be just over or at 7.45 inches.
I don’t run a shroud. Your fan is plenty close enough to the radiator you won’t need one if the pump is turning the correct speed.
Fixed my damn math. Sorry for the confusion.
You have a 6.75 inch water pump pulley. To get to 20% overdriven, you’ll need a crank pulley that is 8.10 in diameter.
At 10% over you’ll need to be just over or at 7.45 inches.
I don’t run a shroud. Your fan is plenty close enough to the radiator you won’t need one if the pump is turning the correct speed.
Fixed my damn math. Sorry for the confusion.
