'89 360 LA valve spring/cam confusion

ok we'll figure late roller block 308 head combination 360 stock compression what year are we working with.? Truck auto trans, any other details
basically a stock rebuild daily driver? will have to keep stock base circle on the cam if you want to retain pushrods so no regrinds
\


some might give you some suggestions on your valve job
2.02 IMHO take a lot of work to make worthwhile
does your machine shop have a machine that can machine the seats?
if so they can add a top cut and bottom cut at essentially no charge if you are up to some hand blending at the bottom of the cut
you end up with a 5 angle valve job