A-727 small metal debris in pan - rebuild?
Thank you for taking a look at the filter and debris, that's much appreciated; I'll carry on with cleaning and checking the valve body and report back when it's rolling.
Thank you also Lord Sparky.
I agree it doesn't look too bad, but there are some concerning bits in there.
Normal would be little flakes of metal like is there and some blackish paste.
Blackish paste is normal wear of the fluid pressures wearing on aluminum fins inside the converter, and the metal flakes is normal bushing wear.
All that said, black chunks are not normal.
Since it's already out it would be wise to at least pull the pump and clutch packs for inspection.
Chances are you will get away with it for awhile if you don't do it if I'm seeing what I think I am seeing.
If you plan to keep the car and be able to trust it, then now's the time to make sure it's ok.
With a messed up TP control and early shifting I suspect you will find the direct clutch got toasty. (hench the black chunks)
(retired ASE and ATRA certified here)
Oh, and don't forget to flush your cooler lines both directions, as that kind of stuff can and does get hung up in the coolers
