US Car Tool torque box and subframe con. install

One more, if you are going to pay or barter for the welding work (I did all my own prep and finish) the torque boxes took about 45 minutes of welding and the subframe connector took a tad over 2 hours. Just something to go by. Brenno doesn't take breaks once he starts welding. We did the boxes first so that when I fitted the subframe connectors they were in place to work around (they overlap) so these two steps happened on two different days. He said that it was really important to get the subframe connectors tacked up using a jack stand to hold them solidly to the floor and then to weld them up a bit at a time moving from side to side, and inside to outside to keep from warping the floor or the connectors.