Need Good Leaf Springs, New, not Refirb... Source?

-

70DusterBob

Well-Known Member
Joined
Feb 20, 2016
Messages
781
Reaction score
148
Location
Texas
Anyone know where to get some newly mfged leaf springs? I had the ones I have on the car now refirbed about 14 years ago, but they are sagging again. They did last, but I would like some new, perky ones. Does anyone know if anyone makes these anymore?

Thanks
 
Thanks. Found some on Lason's on the right side of this page. I will look into ESPO too.
 
Suggest you get the 6 leaf springs for 340 cars from ESPO. I always order them with an extra inch of arch, then when they settle after a year they are at stock height.
 
Suggest you get the 6 leaf springs for 340 cars from ESPO. I always order them with an extra inch of arch, then when they settle after a year they are at stock height.

Thanks, will do. Appreciate it!
 
Suggest you get the 6 leaf springs for 340 cars from ESPO. I always order them with an extra inch of arch, then when they settle after a year they are at stock height.

my espos never really settled. the +1" were still just as high years down the road.
 
here ya go. espo +1" rear springs. 6 leaf v-8 spring. the v-8 spring has a larger eye bolt.

jamie-magazine-pic-jpg.jpg


dsc_0024-jpg.jpg


dsc_0096-jpg.jpg
 
and the ESPO springs will come with the new front bushing already pressed in. I think you can order the new correctly sized, correct strength bolts from them when you order.
 
and the ESPO springs will come with the new front bushing already pressed in. I think you can order the new correctly sized, correct strength bolts from them when you order.

Exellent. I will either drill the hole out for the bigger bolt or just use the one they give me. Good deal that they are already pressed in. They offer the poly bushings, which I will get.
 
Just got through installing 002 & 004 Mopar super stock springs in a 72 Duster. They made a big difference in the rear ride height compared to the old tired stock springs. Ordered them from Amazon, $125.00 each, free shipping.
 
Last edited:
I like these, and there is an option for a 2-1/2" lift w/6 leafs. Sounds good to me.
I have these. Caution, if your springs are sagging now you will get 4+" of lift. Don't get me wrong, I like them but it was a surprise when they where first installed.
 
I will also endorse General spring of Kansas City six on six XHD Leaf pack with a 3in over Arch American Steel very nice
 
Last edited:
over Arch to accommodate 275 Nitto drag radials on 8 inch Cragar SS rims

Screenshot_2020-03-17-19-11-30.png
 
-
Back
Top