67 twin turbo dart
Got the cold side all done today, just had to trim off a bit from the original design MadDart did. Had to roll a bead on the side I cut and onto the other connector pipe parts. Need to order a 45* 2.5"-3" silicone hose due to the angle of the hot side of the turbo to I/C. Got the blow off valves plumbed and the oil temp and psi wired up. Course this is after I had to cut out some more from the inner fenders. Parts for the exhaust will be here next week and then to start on that.
Got the cold side all done today, just had to trim off a bit from the original design MadDart did. Had to roll a bead on the side I cut and onto the other connector pipe parts. Need to order a 45* 2.5"-3" silicone hose due to the angle of the hot side of the turbo to I/C. Got the blow off valves plumbed and the oil temp and psi wired up. Course this is after I had to cut out some more from the inner fenders. Parts for the exhaust will be here next week and then to start on that.
