Need help identifying this A833 please!
You can skip that second picture that was just the guts LOL..
Here's what I can tell you from going from a normal Hurst shifter to a vertigate....
I use the same reversed Rod but I have to flip the reverse lever on the transmission over because the action is opposite. On a regular Hurst shifter you go over to the left and forward on a v gate shifter you pull backwards on the lever so the action is opposite so the ear needs to be flipped over but the same reverse rod...
Of course I made my own straight rods out of material I bought from Ace hardware and I did weld the little tabs come to the allthread that hook onto the shifter ears on the transmission. One thing I noted when I went from a normal Hurst shifter to the v gate is I had to switch the one two shifter and the 3-4 shifter ears on the transmission. They still faced upwards but the offset needed to be changed..
So again all the ears on the transmission had to be taken off and either flipped upside down or switched...
You can skip that second picture that was just the guts LOL..
Here's what I can tell you from going from a normal Hurst shifter to a vertigate....
I use the same reversed Rod but I have to flip the reverse lever on the transmission over because the action is opposite. On a regular Hurst shifter you go over to the left and forward on a v gate shifter you pull backwards on the lever so the action is opposite so the ear needs to be flipped over but the same reverse rod...
Of course I made my own straight rods out of material I bought from Ace hardware and I did weld the little tabs come to the allthread that hook onto the shifter ears on the transmission. One thing I noted when I went from a normal Hurst shifter to the v gate is I had to switch the one two shifter and the 3-4 shifter ears on the transmission. They still faced upwards but the offset needed to be changed..
So again all the ears on the transmission had to be taken off and either flipped upside down or switched...
