quick subframe connectors question
I used the sub connectors from mancini but you can make these easily from 1.5x2 inch or whatever stock you want. The front has a steel plate tht T's and the rear has pieces that extend on both sides. They were a little too narrow so I cut them to straddle the rear frame and then rewelded. There is plenty of plate on the sides for lots of welds. Has held up fine for 10 years even with my crappy welding skills at the time. I did have to flatten the pinch weld on the floor to get the connectors up as high as possible.
Note that this is a street only car and also a 72 B-body.
?
I used the sub connectors from mancini but you can make these easily from 1.5x2 inch or whatever stock you want. The front has a steel plate tht T's and the rear has pieces that extend on both sides. They were a little too narrow so I cut them to straddle the rear frame and then rewelded. There is plenty of plate on the sides for lots of welds. Has held up fine for 10 years even with my crappy welding skills at the time. I did have to flatten the pinch weld on the floor to get the connectors up as high as possible.
Note that this is a street only car and also a 72 B-body.
