Ladder bars..??..

j par said

You do realize that the floaters clamp around the housing that do not clamp down on it as in it allows the housing to roll. In the instructions your to put a thin layer of grease on it so it can rotate does the Springs go up and down.. probably not much..

Click to expand...

Yes
So the point of "binding" is that, that leaf spring is also going to slide back and forth threw that bracket threw a bunch of bushing holding it from side to side motion as well as being able to slide forward and and back threw the floater(my statement was "100 ways to bind")exaggeration but the roller either are going to be tight on the side of the leaf spring(bind) or loose(aka loose trac bar affect)
The leaf spring will slide, up and down, the axle. the slotted plate that i outlined in red. from the pic you posted of the Floater!

Maybe i should rephrase that....
Because of the slotted Plate(Part of the floater kit) that the spring centering bolt will slide forward and back as the spring get longer and shorter as the suspension goes up and down.
Rear shackle will do the same as always.

When i first read slider i took it was replacing the shackle for a slider.......NO slider as part of the floater and retain rear shackles.
I'm just telling you and others, that i finally get that.