Built and running

If you start it do it like you are breaking in the cam
IDK what oil you are using
but
zddp has to be HOT to work
It's not going to get hot just starting it
also your rings are not going to break in
so
you can pre heat your oil with a hot plate under the pan
once you get it on the road do about 10 progressively longer blasts up to some illegal speed and let it coast back to slow
you are tryig to load the rings then cool and lube them

The kit mentioned stage two used to be called Tow and Go
what settings I use
TF-3 is full manual but convertable back to stage 2
recommend part throttle ik down valve body but kit will also work on cable shift with rear pump with some easy mods
Kit was the basis of he great TF-OD kit