Porting small block 915 j-heads
That was a center punch he pushed thru the crack, then he touched it with a flapper wheel and got a vary large hole!!!!!
The next picture down.
I did the same thing to my "test head", trying to open up the throat/bowl around the SSR..........mine, i just covered up with green epoxy and moved one.:D
This is the other half of that port.
That was a center punch he pushed thru the crack, then he touched it with a flapper wheel and got a vary large hole!!!!!
The next picture down.
I did the same thing to my "test head", trying to open up the throat/bowl around the SSR..........mine, i just covered up with green epoxy and moved one.:D
This is the other half of that port.
