4 speed console carpet hump

OnEbAd340 · May 8, 2020

Does anyone know if there is someone or a place that sells repro fiber board or fiberglass humps for the 4 speed console (1969)?

I never had the original fiberboard as it was long gone. Any help would be appreciated!

Murray · May 8, 2020

I have only seen people that make their own. Good luck.

Bigboy 68 · May 8, 2020

@waggin. He Repops them

OnEbAd340 · May 8, 2020

Bigboy 68 said:
@waggin. He Repops them

Thank you, sent him a message inquiring about it.

OnEbAd340 · May 8, 2020

Murray said:
I have only seen people that make their own. Good luck.

Thanks if I cant find it, I guess I'll make one and try to have it 3d printed.

cudarudy · May 8, 2020

OnEbAd340 said:
Thanks if I cant find it, I guess I'll make one and try to have it 3d printed.

don't think you need one if using a hurst shifter.

OnEbAd340 · May 8, 2020

cudarudy said:
don't think you need one if using a hurst shifter.

I have the cutout on the console so when tring to carpet it, the carpet in that gap has nothing to be glued onto. My car is a factory console car, this is the orig console with the factory hurst shifter

OnEbAd340 · May 8, 2020

waggin · May 8, 2020

OnEbAd340 said:
Thanks if I cant find it, I guess I'll make one and try to have it 3d printed.

i have a couple of them already made out of fiberglass, I left a large flange to trim down as desired 50$ shipped

4spdragtop · May 8, 2020

Nice work Curtis!

waggin said:
i have a couple of them already made out of fiberglass, I left a large flange to trim down as desired 50$ shipped

View attachment 1715524306

View attachment 1715524307

View attachment 1715524308

Murray · May 8, 2020

Would it be easier to make these on a 3D printer?

waggin · May 8, 2020

Murray said:
Would it be easier to make these on a 3D printer?

I'm not familiar with the printer deal but the fiberglass is very flexible and will hold up to vibration

waggin · May 8, 2020

in the pictures from left to right the first one is the mold for 65 barracuda, second one is 67 and up then the console hump and a finished ready to install 65 four speed hump, 66 is diffrent so i dont have an original to make one

moparchris340 · Oct 1, 2023

waggin said:
i have a couple of them already made out of fiberglass, I left a large flange to trim down as desired 50$ shipped

View attachment 1715524306

View attachment 1715524307

View attachment 1715524308

By chance do u still have any of these? Thx

waggin · Oct 7, 2023

moparchris340 said:
By chance do u still have any of these? Thx

what is the car you need it for?

moparchris340 · Oct 7, 2023

waggin said:
what is the car you need it for?

68 Dart

waggin · Oct 11, 2023

it will take me a week or so to find them as i am unpacking

Demonracer · Oct 11, 2023

Wags, good to see you back on FABO. I hope all is going well with you.

moparchris340 · Oct 12, 2023

waggin said:
it will take me a week or so to find them as i am unpacking

Ok thank you

4 speed console carpet hump

OnEbAd340

Well-Known Member

Murray

FABO Gold Member

Bigboy 68

it is what it is

OnEbAd340

Well-Known Member

OnEbAd340

Well-Known Member

cudarudy

cudarudy

OnEbAd340

Well-Known Member

OnEbAd340

Well-Known Member

waggin

moving on ain't easy if you drive a Ford :p

4spdragtop

FABO Gold Member

Murray

FABO Gold Member

waggin

moving on ain't easy if you drive a Ford :p

waggin

moving on ain't easy if you drive a Ford :p

moparchris340

Active Member

waggin

moving on ain't easy if you drive a Ford :p

moparchris340

Active Member

waggin

moving on ain't easy if you drive a Ford :p

Demonracer

71 Demon 00 Ram 16 Chrysler 300S 05 Caravan

moparchris340

Active Member