67 Dart Remote Mirror Demystified

Part 2...
Spring metal retainer to align the joystick


Retainer trim nut


When reassembling the mirror, note the alignment tabs in the mirror head


While holding the mirror actuator, mirror trim and mirror mount install the screw



Install the stud ( this one has a buggered thread near the machined end I don't know if it is intentional, the stud seems to be hardened as I could not file it down, or my HF files were crappy)


The spring retainer goes on one way, and keys the joystick so moving the stick up makes the mirror tip up



Trim ring / nut (note joystick is in the up position)

Mirror in the full up position