Project “Ghost Duster”, 1970 Duster Corner Carver
I removed the inner fenders, core support, basically anything from the firewall forward. The car looked pretty scary like this, but really, as long as the frame is square corner to corner it’s pretty hard to mess up. Once they are in there’s not much movement . I test fit many times and triple checked my measurements before finally welding the rails into position.
I removed the inner fenders, core support, basically anything from the firewall forward. The car looked pretty scary like this, but really, as long as the frame is square corner to corner it’s pretty hard to mess up. Once they are in there’s not much movement . I test fit many times and triple checked my measurements before finally welding the rails into position.
