408 Stroker. Fresh build

no wait don't go
Rumble must have been thinking of a Magnum
I've had enough rocker ball problems to just do pushrod oiling as a SOP
That's "standard perating procedure" rumble
I've been pushing lifters with a narrow flat ground on the side like found on a stock 229 chevy V6
LA's do not get enough oil just flowing down past the lifters or splas
That's why edm lifters are mandatory for SFT cams
and I think the ground flat on hyd
I heard that someone has edm'ed hyd lifters but can't verify
if you have access to a magnetic plate grinder and a v block grinding the flats is dyi
Crower has a picture in their catalog
dart19666 gives members good guy prices if you can't diy