My requirements... what to build?

aj's cam from post 42
HE2430AL, INT .504" EXH .515", w/1.5 & INT .538" EXH .549" w/1.6, 223 230, 270 276, 110,
4.5 BTC 48 BBC, 38.5 ABC 2 ATC. HE3038AL, INT .515"
270-276 Advertised Duration (at .008" lift) Same as MP & Engle & Racer Brown


lift lobe adv .050 .200
.504" .336" 268° 224° 140° K-56HYD Engle @.008 intake lobe
.520 lift/, ...276 230 @ 0.050, K58HYD, exhaust lobe

desktop dyno 408,single plane intake. 10:1 edelbrocks (IE.249 cfm @ 0.500", 28".) small tubes
Hughes HE2430AL cam:
HP = 401 @ 5,500 RPM
TQ = 427 @ 4,000 RPM
It looks like the HE2430AL would be the Torque cam, and when simulated with the Dual Plane intake, Peak Power and Torque did not change very much, but the torque curve was increased and flatter from idle to max torque.