318 LA rebuild after losing a valve seat

I have an open rear, confirmed that when I had in off the ground bleeding the brakes. However, I removed the drums for cleaning and forgot to replace them before bleeding. So, I ended up pushing the shoes out. I adjusted them back so I could get the drums on and finished bleeding. I checked again just now in case I didn’t pull the shoes in enough, but still GREAT resistance with one wheel on the ground. Both wheels in the air and I moved the linkage by hand 2 clicks forward from the rear of the car (should be neutral, right?). Wheels turn with no resistance in opposite directions, drive shaft does not turn. With one wheel on the ground, lots of resistance but the drive shaft turns with the wheel.

And, I wasn’t frustrated with you at all. I was frustrated with myself for not understanding the problem!