Bump steer question

HemiDenny said

Those 1.12 bars must make your front end stiffer than a wedding pecker.....hope not to offend, just a common technical term used in most hot rod shops

Click to expand...

I run 1.14” MP bars.

.81 MP drag bars are rated 90 lbs/in wheel rate
1.14 MP bars are rated 350 lbs/in wheel rate

I’m almost exactly 4 times as stiff as a drag bar. And think, there guys out there with 1.24” t-bars !

At 1” compression or rebound I’m about 1/32” bump steer

At 2” compression or rebound I’m about 1/16” bump steer

....Not bad