1968 Dodge Dart

-
.

D2CDB8CC-CEB0-48AA-AC42-E56923F85558.jpeg


8EE8A52F-8576-4794-B549-2B3BEBF08CA1.jpeg


E6D234FD-CEB2-4A4A-976A-41A28F6FC98C.jpeg
 
looking good Mark. When i saw the line-lock and that pretty paint, three words popped into my head. synthetic brake fluid.

hows the Wheelie King doing?....he looks right at home.
 
looking good Mark. When i saw the line-lock and that pretty paint, three words popped into my head. synthetic brake fluid.

hows the Wheelie King doing?....he looks right at home.
Tod is doing great. He will keep me in line with all the wiring, you know red to red black to black.
Are you being serious about the synthetic brake fluid? I benched blead the master with Dot 3 but if you think synthetic is the way to go I order a new master. Let me know.
 
Takes the worry out of a fresh build. I would hate to get one drop of non synthetic on that paint. I used it on the Flash and the purple Hemi Dart I just finished. The plus side far outweighs the minus side. I used Wilwood Brand from Summit.

JMHO....others may vary.
 
the four powder coated black upper shock spacers were in a small Qa1 ball joint box....along with the cotter pins for the ball joints. Ill send you 4 more....if needed.

on the fifth picture (down) posted above....I think I see the above mentioned (white / red) Qa1 box on the second shelf down...right above the stacks.
 
the four powder coated black upper shock spacers were in a small Qa1 ball joint box....along with the cotter pins for the ball joints. Ill send you 4 more....if needed.

on the fifth picture (down) posted above....I think I see the above mentioned (white / red) Qa1 box on the second shelf down...right above the stacks.
I’ll look again. Thanks Denny
 
fire in the hole?.....itsn't that usually followed by a giant BOOM?
 
:thumbsup:!!
Not sure if your brakes are done, but we swapped to synthetic in dads 67 cuda. Didnt flush, all we did was keep bleeding and topping up with Synthetic(purple). We swapped after master leaked dot 3 down the firewall.:BangHead:
Same master would be fine I bet?
Looks great!
Tod is doing great. He will keep me in line with all the wiring, you know red to red black to black.
Are you being serious about the synthetic brake fluid? I benched blead the master with Dot 3 but if you think synthetic is the way to go I order a new master. Let me know.
 
I was just headed to the parts store for brake fluid and power steering fluid when the thorn called me! Synthetic it is!
 
you will be happy, it will keep your nuggies from sucking up to your throat when you see a drop of escaped fluid......friendly reminder, doublecheck and re-tighten ALL your connections before you start to bleed.
 
you will be happy, it will keep your nuggies from sucking up to your throat when you see a drop of escaped fluid......friendly reminder, doublecheck and re-tighten ALL your connections before you start to bleed.
I will for sure. I'll call yoou soon!
 
-
Back
Top