Mopar Cast Valve Cover with ME Wagner adjustable PCV

-
O

Overlook68

Well-Known Member
Joined
Mar 4, 2020
Messages
56
Reaction score
28
Location
NorthGeorgia
Current setup has a small PCV on the valve cover passenger side rear. Front passenger side has a plug grommet. Driver side rear has a grommet with push in filter and front is the oil filler cap.

The ME Wagner is larger inside diameter than the current grommet PCV location. I tried a 1.25" wide outside diameter grommet but it doesn't cover the taps. I need a wider grommet. Mancini has a "wider" grommet. Is that what you guys are using?
 
I know exactly what you need for a Wagner PCV to MP cast cover and am pretty sure you won't find the correct aftermarket grommet at most stores.

Order a Ford Performance Parts Valve Cover Grommet Set M-6892-F from Summit or similar. Fit and works perfectly. :thumbsup:

20180404_184340.jpg
20180404_184305.jpg
20180404_184158.jpg
 
I see what the prior owner did. He found a wide enough grommet that mostly fit and he used black sealant to hold it in. Instead of using the 2nd oil filler cap. Most likely to have a shorter vacuum hose to run at the rear of the throttle body. Are you guys running two oil filler caps?

mopp50076172.jpg
 
My suggestion worked with BB cast covers that come with a breather/filler hole already knocked out. The opposite end is not (just a blank) like you see in these pics. I've got the pcv in the notched breather hole on right side, and a twist-on filler/breather cap on the opposite cover.

20190428_204739.jpg
20190428_204800.jpg
 
You must log in or register to reply here.
-

Back
Top