[WANTED] Big Block A-Body 0.70 fan spacer

-
Status
Not open for further replies.
I think you mean 0.70 must a bit over 11/16". 0.070 (seventy thousandths) wouldn't do much, I see you must have changed it in the text but not the title. I will check to see if I have the correct spacer on Monday.
 
HemiSSDart said:
I think you mean 0.70 must a bit over 11/16". 0.070 (seventy thousandths) wouldn't do much, I see you must have changed it in the text but not the title. I will check to see if I have the correct spacer on Monday.
Click to expand...

Dont u mean 1/16 '' ? .0625 , I make my own - easy .
 
famous bob said:
Dont u mean 1/16 '' ? .0625 , I make my own - easy .
Click to expand...

No, re read my reply. He needs a 0.70 (seven hundredths) spacer which is just a big bigger than 11/16" I have had over a dozen factory big block A-Body's and that is what they use.
 
HemiSSDart said:
No, re read my reply. He needs a 0.70 (seven hundredths) spacer which is just a big bigger than 11/16" I have had over a dozen factory big block A-Body's and that is what they use.
Click to expand...
THSATS DAM NEAR 3/4'' , THINK I`D CUT A 1'' DOWN in my lathe , I cut one down to 1/2'' for my mech fan experiment .
Kinda mis understood the op.
 
Thanks for the responses... Yes, I posted the incorrect dimension 0.070 on the title. I need the 0.70 spacer.
 
I'm looking for a 0.70" fan spacer for my car. The part number cast on the back of the spacer is 1851960. If my information is correct, it was used on 68-69 big block A bodies and 73-74 A and C body (198-225 and 318 post. Any help is appreciated.
 
this one look like what you need ? Tom
IMG_0652.JPG
IMG_0653.JPG
 
Status
Not open for further replies.
-

Back
Top