Stroker specific cams (Part 2) cam reveal

Wyrmrider said

above you posted
138 lbs. @ 1.950” Installed Height which is what concerned me
what is your installed ht

I like post 7 much better
you scared me hence the quick references
cam looks great
looks like a bigger nose than what I had in my database
or a little more duration 280 for the lift which is not a bad thing
chasing the last .010 lift is

Click to expand...

I received a response from the cam vendor for suggested springs.

Outer Spring Out Side Diameter (O.D.): 1.465"
Outer Spring In Side Diameter (I.D.): 1.091"
Inner Spring Out Side Diameter (O.D.): 1.090"
Inner Spring In Side Diameter (I.D.): .807"
Seat Pressure: 122 @ 1.650"
Open Pressure: 353 @ 1.100"
Valve Spring Rate: 425
Maximum Suggested Lift: .690"
Coil Bind: .950"

Also, The recommended max pressure on for the lifters that Mike specced is 380, so I need to confer with Mike on this. I do remember talking to TFS and they stated that the flat tappet based springs were also being used for hydraulic roller engines in certain builds. Finely, the TFS head will take a 3/8 push rod, now you know.