Taking the 4 1/2 inch nuts off the bucket seat on one side and the four thresholds screws and the one kick panel screwed to back the carpet off is way too easy even if you have to pop the back seat out which of course it just pops out...
I've said this probably a half a dozen times on this form at least.. for the price of those prefabbed bars which you have to get under the car and drill holes and make sure they're drilled properly all the way through to catch the other side and then they're just kind of dangle in there and not really solid and part of the frame. You end up having to weld them in anyways.. by that time you could have went to the steel yard and had two four foot pieces cut for $40. And if you didn't have a welder you can buy one at Harbor Freight for $89. And if you didn't have a helmet you can buy one for 40 bucks and if you didn't have any welding gloves you could buy them for 5... Still cheaper than those prefabricated astronomically overpriced frame connectors...
