Head Gasket Suggestions

OP, when the heads are off, carefully measure how much the piston top is down from the deck with the piston at TDC. For that engine it is like going to be in the range of .080". If so, you won't quite make even 9.0 Static CR even if you mill the heads .030" and use a .039" thick head gasket Felpro 1008).

BTW, Felpro standard kit gaskets 8553PT compress to about .050-.051", the Felpro 1008's compress to .039" and the Mr Gasket 1121G compresses to .028". The 1121 G's reportedly need a good flat deck and head.