Finished installing the mirror's..The bezel nut they sent me with the remote mirror was wrong..Ordered retaining clip and when I tightened the bezel nut up it left a gap between the retaining clip and the neck of the bezel..I found a thick nylon washer and put it between the retaining clip and the inside of the door with a hole big enough in it that the neck of the bezel nut went through and it tightened up nicely..I tried using my original bezel nut but the pitch of the threads were different on the toggle end of the cable so the original bezel wouldn't tighten up..The nylon washer worked just fine and you can't tell it's there..