69 Barracuda console wiring
The routing is the question, but yes, just orange and black in 69. The black grounds behind the right kick panel to the A pillar and there should be a connector under the right kick for the harness connection from the right dash area. The harness as I saw In mine was taped down to the floor pan on the right in a couple spots and over to the console. The tape used seemed the same as what you find on the lower door vapor seal. Mine was seemingly entrapped in some black seam sealer as well. Best pic I took it seems. It does not come straight down the middle for sure!
The routing is the question, but yes, just orange and black in 69. The black grounds behind the right kick panel to the A pillar and there should be a connector under the right kick for the harness connection from the right dash area. The harness as I saw In mine was taped down to the floor pan on the right in a couple spots and over to the console. The tape used seemed the same as what you find on the lower door vapor seal. Mine was seemingly entrapped in some black seam sealer as well. Best pic I took it seems. It does not come straight down the middle for sure!
