Sandin A/C and compact P/S pump brackets

pomonamissel said

i always like to have at least one belt pulling straight down to the crank from the water pump , for a positive pull and very little slippage . that said looks cool there . if you dumped the mech fuel pump it could be on the passenger side low mount . isn't this ride going efi carb style ? with the pump in the tank ?

Click to expand...

no on the efi, I dropped the entire package out as you see it and it is going back in that way. no pump in the tank. There are pluses....and minus's of the pump in the tank, not even taking into the consideration of unnecessary and additional $$$$ for this build.

Another PIA of the low passenger side is routing the hoses. Remember, the evaporator hose connection from the compressor is on the drivers side.....IMO, it makes sense and is much cleaner to have the compressor not too far away or on the other side of the engine.

Since I have already done several Hemi versions with this location, I already have a good handle on the hoses.