[WANTED] 69 Barracuda Right/Pass Side Fender Fish Emblem

-
Status
Not open for further replies.

Shakedownscott

Well-Known Member
Joined
Dec 31, 2017
Messages
49
Reaction score
22
Location
Vermont
Rating - 100%
2   0   0
Contact seller
Looking for a '69 fish emblem p/n 2963 656 for the right fender. Driver quality, it doesn't have to be perfect.

49950360266_80f2c66d21_o.jpg
right -passenger- fender fish by shakedownscott, on Flickr
 
Looking for a '69 fish emblem p/n 2963 656 for the right fender. Driver quality, it doesn't have to be perfect.

View attachment 1715537511right -passenger- fender fish by shakedownscott, on Flickr
Don't go by the part number as it is the same across multiple years. Pin location is critical unless you want to re drill the fender. The trunk fish have 1 long thin pin and 1 short stubby pin, for 69 the tail pin is closer to the center
 
Don't go by the part number as it is the same across multiple years. Pin location is critical unless you want to re drill the fender. The trunk fish have 1 long thin pin and 1 short stubby pin, for 69 the tail pin is closer to the center

Thank you for the information, never would have figured that.

From what I've read the '69 fender fish is a one year only; and in'67-'68 the fish was bigger?
 
The fish that I am looking for is about 3-5/8" long, with 1-1/2" pin spacing. Pretty sure that is the correct one for a '69. The car I have came with no fish or holes for them, was re-badged as an "S" by the PO.
 
Roger that!. I'll look in my stash for you this week. Here is my 69 almost done. We are doing assembly this week. New AMD qtrs.

DSCN6226.JPG


DSCN6227.JPG


95297771_1564342500397180_7314685843208142848_n.jpg


95499898_1564342187063878_8825452207462678528_n.jpg


95627673_1564342110397219_1456899571622871040_n.jpg


95629538_1564342327063864_1305326542204698624_n.jpg


95942785_1564342427063854_1190372970887905280_n.jpg


98153988_1578885222276241_4686413115028406272_n.jpg


101568930_1587732898058140_2448138466890874880_n.jpg
 
The fish that I am looking for is about 3-5/8" long, with 1-1/2" pin spacing. Pretty sure that is the correct one for a '69. The car I have came with no fish or holes for them, was re-badged as an "S" by the PO.
Feel up behind the fender where the fish goes most likely you will feel the filler. If the fender is a correct 69 you should be able to reclaim the holes. Your dimensions are correct.
 
Roger that!. I'll look in my stash for you this week. Here is my 69 almost done. We are doing assembly this week. New AMD qtrs.

Thanks for looking Mike, I appreciate it.

Your ride is looking great. Love the color,it goes really well with the white top. Are you going to add the stripes back?
 
Feel up behind the fender where the fish goes most likely you will feel the filler. If the fender is a correct 69 you should be able to reclaim the holes. Your dimensions are correct.

Thanks, I will give that a shot. If I remember right, I think one is a '68. They both have the side marker lights filled in.
 
Thanks, I will give that a shot. If I remember right, I think one is a '68. They both have the side marker lights filled in.
On a 68 fender the hole closest to the fishes mouth will be correct.
 
I have a pair of fishes, pn 2785321 pins are 2.75 on center, pn 2785320 pins are 2.5 on center. Both are 4.5 in. long PM if interested. not perfect
 
I have a pair of fishes, pn 2785321 pins are 2.75 on center, pn 2785320 pins are 2.5 on center. Both are 4.5 in. long PM if interested. not perfect

Thanks for the offer but those are a little larger than the ones Im looking for. I think the ones you have fit '67-'68 barracuda.
 
I have one finish is nice but will have to attach with double sided tape 3m both posts are gone,or epoxy on post from pitted fish $20 plus the ride

15913273022242074398377304497751.jpg


15913273425301400139052442893271.jpg
 
Status
Not open for further replies.
-
Back
Top