1” FFI Torsion Bars - setting ride height

So the car is fully loaded with the engine/trans installed and it’s too high?

Have you rolled the car at all or just let it off the jack?

If you haven’t rolled the car at all, it hasn’t settled all the way down. You can jump up and down on the bumper all you want but if the wheels don’t roll it won’t sit all the way down.

Now, if it’s WAY too high, it probably won’t sit down that far. I don’t know what the hex offset is on FFI’s 1” bars. That size is kind of an issue, they’re large enough that the factory offset is probably too much. But they’re not large enough to be 0 offset, PST had the opposite issue with their first batch of 1.03” bars because they made them 0 offset, and people found they couldn’t get the cars to stock height (worked fine doe lowered cars).

But if FFI ran with the factory 20 degree offset you may need to clock the LCA’s the next flat up. I would call Firm Feel, they’re very knowledgeable and may be able to sort out what happened.