Mullen cyl heads

-

SS Lancer

Well-Known Member
Joined
Mar 15, 2013
Messages
4,512
Reaction score
3,674
Location
North Carolina
Greetings - could anyone tell me if the Mullen oem 360 castings run TA 340 shafts and rockers or reg W2 shafts and rockers ?
Also will the Crane/Mopar blue .775 offset rockers work with these heads
Thank ya
Thank ya
Very much !!!

20200602_220558.jpg


20200602_220653.jpg


IMG_5711.jpg


IMG_5709.jpg


IMG_5708.jpg
 
I'm pretty sure they ran the W2 rocker arm assemblies. If you look below the "3304" number, you will see the unbored pad for normal LA rocker assemblies.
 
The casting number matches a 1975 to 1976 360 casting number. But machined differently.
 
I'm pretty sure they ran the W2 rocker arm assemblies. If you look below the "3304" number, you will see the unbored pad for normal LA rocker assemblies.

That is at least the T/A offset. BTW, I have a set of brand new MP T/A rocker shafts. If you need them, PM me.
 
I'm pretty sure they ran the W2 rocker arm assemblies. If you look below the "3304" number, you will see the unbored pad for normal LA rocker assemblies.
So u think reg W2 rocker arms can be used ? Im going to add a photo from previous owner where Norris rockers were on head to show me set up etc.
 
New guides and seats installed
Trick Flow valves (5.200 ) length and all other hardware on the way !

IMG_2218.jpg


IMG_2217.jpg


IMG_2216.jpg


IMG_2215.jpg
 
-
Back
Top