The 1947 Dodge Build

I am basing the harness on part of a 65 A Body dash harness as I am quite familiar with it in a stock application. The trick is melding it with an 80 J Body ignition switch and turn signal harness as I will be using a J Body column shift tilt column in the 47. I am modifying the 65 Wiring as needed using the same color code wiring where possible with the switches I am using. These are a regular A Body headlight switch, a 2 speed 66 Chrysler rear defroster switch for the stock 2 speed 47 windshield wiper motor, a 47 pushbutton starter switch for with windshield washer pump. A brake system idiot light from a 69 A108 van, another 66 Chrysler rear defroster switch for the rear defroster I’ll be adding. The heater control Switch including blower operation is from a 63 or 64 Valiant so everything should interface fairly easy (I hope!). The lighter will be the easiest to add - a single red wire from the lighter to a fuse in the hot fuse panel.