What he said. My understanding is I would not need the offset bushings with tubular UCAs. Going to play with the set up over the next couple days and see what happens. Thanks for the feedback.
You shouldn't need them. If you find you DO need them, then what you should actually do instead of installing offset bushings is send your current set of UCA's back to PST. Because that's not how they're supposed to work.
I have offset bushings installed in the Magnumforce UCA's that I have, I was able to get +8° of caster with them while the camber was at -1°. The offset bushings are only good for a couple degrees of caster by themselves.
