Window track location

-
jim

jim

Well-Known Member
Joined
Feb 4, 2005
Messages
387
Reaction score
157
On my 68 hardtop dart is this how this track goes in for rear window?

IMG_20200623_131617848.jpg
 
I think your going to have a hard time getting the vice in the cavity.:rofl:

The factory service manual has done images that will help
 
Lord Sparky said:
Yes, that is the top. Roller goes in slot.
Click to expand...
I would love to meet the engineer who designed this set up. I would tie one arm behind his back,tape one eye shut makehimndmake him lay on on tacks and put mine together in 30 minutes
Thanks guys. As always
PS don't tell my son in-law. He's a engineer
 
Well got things together but window is not rolling up completely. The back of the window is hitting the roof but the front is not reaching. I don't the gasket in. Where is the adjustment point
Thanks

IMG_20200623_164628778.jpg
 
The adjustment points are the attachment studs where then mechanism bolts to the body. Loosen the bolts and lift the window and retighten the bolts.You might have to do it more than once.
 
My car was a basket case when I got it. I put in 67 regulators thinking they were for a 68. They look the same but aren't.2 days to figure it out
 
The regulators are the same for 68 to 72. The factory manual has a good diagram and instructions for installation.
You can download the manual from the internet.
I hate the self correct feature.
 
You must log in or register to reply here.
-

Back
Top