[WANTED] A.C. Crank pulley /6
- Thread starter justme
- Start date
-
- Status
justme
Well-Known Member
Yes please!!
Manual steering is just the single pulley/balancer from the alternator. When PS is added its pulley bolts to the front of the single pulley. When AC Is added, its pulley bolts to the rear of the single oulley which means if Adding AC, then the balancer needs to come off. I can get a pic in the morning of a slant 3 pulley setup
Last edited:
justme
Well-Known Member
I would so love that!! Thank you for your help!!! Do i also need a 2 groove water pump pulley?
justme
Well-Known Member
do you want to sell the 3 pulley set up?
LOK here is how the slant 3 pulleys are set up.
With the PS pulley bolted to the front
and if equipped with AC;
And here is still on a motor with the alternator and AC pulleys but no PS pulley - note the unused mounting holes in the front of the balancer.
With the PS pulley bolted to the front
and if equipped with AC;
And here is still on a motor with the alternator and AC pulleys but no PS pulley - note the unused mounting holes in the front of the balancer.
Last edited:
justme
Well-Known Member
Do you want to sell that ? If it would make thing easier for you Id be happy with just the ac pulley!
I’ll PM you
- Status
-
