Thanks,
i have the bellhousing bracket, but it did nt alighn properly with the ball
I have the plate that goes to the bellhousing, it was way off (moved to far to the rear of the car) so I used the 67 a body style on the bellhousing. , I can’t change to Brewers clutch fork bracket because the holes on the OD bellhousing for the fork bracket are in a different location than a non od bellhousing. There z bar, which I have used in the past is the same length from the tube down to the ground as the z bar I have, the difference is they moved the lever closer to the bellhousing
