HEI... here we go...
If i was more knowledgable I probably would have sourced different parts (maybe) but I was easily able to modify what I had with a Dremel cut-off wheel and some drilling.
The heat sink lined up with the bracket
The control module was out of position due to the first fin on the heat sink - see how the holes don't line up
I removed the first fin with a Dremel cut-off wheel
All lined up
But the control module had some feet... so back to the Dremel and off they came
The coil only lined up with one bolt hole so I inserted the one bolt and snugged it down then marked a new hole through the back and drilled
Yay...