Proform 850 dialing it in closer
Try and find an old DL-32. They are no longer made but should be out there especially if some one is up grading to an RPM or Racepack.
Pretty sure that's what Tuner uses.
Depending on that you're doing MAP
or TPS may be enough with O2 and RPM.
Of course having both would be great.
Doubt I'm going to get TPS this season. I've learned to work with MAP/VAC and notes...
Driveshaft sensor - that would be cool. Hysteric might remember when "Dr Mike" was developing that concept I think it was with strain gages to convert to HP and torque. This was on the old Innovate forum. I think Dr Mike occassionally posts on YB or ST. Ask Tuner if he knows more about this.
Cudafever. Sorry I didn't get any notifications that there were new posts on this thread. Weird but not really surprising.
There's probably some cheap junkyard MAP that can be adapted. The LMA-3 (Auxbox) came with MAP and accellerometers built in so I didn't have to get into learning that.
If i saved my garage log to a "csv" i can open it up in Excel, as a spread sheet but have no clue how to get It back to a graph................. like above
I use Excel 5.0 and the slightly newer version in MS Office 95.
Once the individual columns properly seperated, select the ones of interest. Time should be the leftmost column. Its easier if its there.
Then click on Chart Wizard. I think the best will be to use Scatter chart, but since the data is collected at a consistant rate, the line graphs should work as well.
HMMMmm my have figured out a way to display
Hmm guess not. Thought i could use my snipping tools but this sight won't except it in that format either.
Is it not showing a graph in Logworks ?
Or is it that you get it displayed, but the snipping tool doesn't let you do a direct cut and past to FABO?
If its the latter, paste the snip to a program that will let you save it as a graphic. I like PNG for drawings, but jpg, gif, and bmp work too.
