@Cuda416 Yes, the hump does go around the OD unit. On the passenger side, you could probably leave a good 1/4" past the inside bolt hole. I took a little more off than I probably had too. On the driver side, I would say take the inside bolt hole along with another 1/2". I had to take a little more off after initially cutting out the original hump. I'll get you some measurements when I'm at home tonight, including the height. My goal was to keep at least 3/4" clearance between the trans and the hoop/floor. There was no way around cutting out the old tunnel to make this thing fit, totally worth the OD though in my opinion.
