Lunati Hydraulic FT Cam users..........

I checked one of the ones here.
It was 140@the 1.820 installed height.

[email protected]

[email protected]
[email protected]
[email protected]

This is a 311lb/in spring.

I think it’s the same springs as that previous set I had here, but for some reason those heads came with more installed height.
(They went on a motor with a .480 lift cam.
If the springs were at 1.850 installed height, you’d have 130 on the seat and [email protected] lift, which is about how I remember them being.)

This set of heads does not have the 1.900 installed height that’s listed in the specs, and the springs are not 1.250” diameter.

I don’t know how it is that so many of these parts places can’t get the simple specs correct in their catalogs.