Lunati Hydraulic FT Cam users..........
This is the purple performance 464 hydraulic cam that was in the 318 that came with the duster that was from a cop motor that had 360 heads and a windage tray...
Ground into this solid lifter cam back in 2014 when the Stroker motor was put together with 410 gears and 28 in tires..
A year later I took the heads off and had 202 valves put in and did a little home porting... The next year I put the 1.6 to 1 rockers on and took the factory 273 rockers off... It had an extremely rough idle and couldn't do anything under 3K.. and basically wouldn't even hold on idol for very long and I couldn't go around the corner and second gear and pull out of it without the valve train sounding like it was going to rattle right out of the car...
When I put the 1.6 to 1 rockers that brought the lift up a little over 600 on the exhaust...
In the summer of 2018 I took the cam and lifters in to ken and had a conversation with him... I told him I'm putting 354 gears in it and I want it to idle and I don't want it to make my wife's neck snap back and forth when I'm going really slow but I would still like it to have a little bit of poop...
Now I can round a corner in second and pull right up from 1500 RPMs no problem and it can sit in my driveway and seemingly idle for as long as it wants to...
This is the purple performance 464 hydraulic cam that was in the 318 that came with the duster that was from a cop motor that had 360 heads and a windage tray...
Ground into this solid lifter cam back in 2014 when the Stroker motor was put together with 410 gears and 28 in tires..
A year later I took the heads off and had 202 valves put in and did a little home porting... The next year I put the 1.6 to 1 rockers on and took the factory 273 rockers off... It had an extremely rough idle and couldn't do anything under 3K.. and basically wouldn't even hold on idol for very long and I couldn't go around the corner and second gear and pull out of it without the valve train sounding like it was going to rattle right out of the car...
When I put the 1.6 to 1 rockers that brought the lift up a little over 600 on the exhaust...
In the summer of 2018 I took the cam and lifters in to ken and had a conversation with him... I told him I'm putting 354 gears in it and I want it to idle and I don't want it to make my wife's neck snap back and forth when I'm going really slow but I would still like it to have a little bit of poop...
Now I can round a corner in second and pull right up from 1500 RPMs no problem and it can sit in my driveway and seemingly idle for as long as it wants to...
