What Are You Doing To/With Your Car Today?
Right side looks good! The welds look like **** oh well.
Edit at 3:34pm;
94* in the shade. Time to quit, where's my
Rough price projection for the sheetmetal do far;
$144 Left side trunk floor extension
LH / 1967-1969 BARRACUDA TRUNK FLOOR EXTENSION
$205 or $350 or $380 depending on the part for the trunk floor. Note the weight of the parts! 256 oz, 896 oz, 38 lbs. heh heh heh
1962-76 DODGE & PLYMOUTH A-BODY TRUNK FLOOR
1967-1976 DODGE & PLYMOUTH A-BODY COMPLETE TRUNK FLOOR (best quality)
http://www.autometaldirect.com/amd-trunk-floor-oe-style-p-1204.html
$80 Passenger floor pan
http://autobodyspecialt.com/rh-1967-76-dodge-plymouth-a-body-front-floor-pan-patch/
$245 or $269 rear valance
1967-1969 BARRACUDA STEEL REAR VALANCE (dual exhaust)
Rear Valances | AMD 960-1267-T
$127 right side rear quarter patch
RH / 1967-69 BARRACUDA REAR QUARTER-REAR SECTION
$245 right side rocker panel
RH / 1967-1969 BARRACUDA & 1970-1976 DUSTER / DEMON / DART SPORT OUTER ROCKER PANEL
For now, I think that's all I need in the sheet metal department.
Anywhere between $1046 and $1245 or so, plus tax and shipping. Figure around $1500 after all is said and done. I'm actually getting off lighter than I thought at first.
Other things other than bodywork that need fix that I can do regarding sheetmetal, there is a dent and tear in the floor pan under the driver's seat. easy enough to hammer into shape, drill the ends of the crack and weld up. Once upon a time, a fatty sat down there, real hard.
Right side looks good! The welds look like **** oh well.
Edit at 3:34pm;
94* in the shade. Time to quit, where's my
Rough price projection for the sheetmetal do far;
$144 Left side trunk floor extension
LH / 1967-1969 BARRACUDA TRUNK FLOOR EXTENSION
$205 or $350 or $380 depending on the part for the trunk floor. Note the weight of the parts! 256 oz, 896 oz, 38 lbs. heh heh heh
1962-76 DODGE & PLYMOUTH A-BODY TRUNK FLOOR
1967-1976 DODGE & PLYMOUTH A-BODY COMPLETE TRUNK FLOOR (best quality)
http://www.autometaldirect.com/amd-trunk-floor-oe-style-p-1204.html
$80 Passenger floor pan
http://autobodyspecialt.com/rh-1967-76-dodge-plymouth-a-body-front-floor-pan-patch/
$245 or $269 rear valance
1967-1969 BARRACUDA STEEL REAR VALANCE (dual exhaust)
Rear Valances | AMD 960-1267-T
$127 right side rear quarter patch
RH / 1967-69 BARRACUDA REAR QUARTER-REAR SECTION
$245 right side rocker panel
RH / 1967-1969 BARRACUDA & 1970-1976 DUSTER / DEMON / DART SPORT OUTER ROCKER PANEL
For now, I think that's all I need in the sheet metal department.
Anywhere between $1046 and $1245 or so, plus tax and shipping. Figure around $1500 after all is said and done. I'm actually getting off lighter than I thought at first.
Other things other than bodywork that need fix that I can do regarding sheetmetal, there is a dent and tear in the floor pan under the driver's seat. easy enough to hammer into shape, drill the ends of the crack and weld up. Once upon a time, a fatty sat down there, real hard.