Info on the weiand 8007
YMMV
edit: My measurements on the 8007 were
for a pad ht of about 5.41"
with a 4150 and an aircleaner that was 3.7" tall, there was 1/8 to the hood. (Check with clay)
The air cleaner may have been a K&N base and filter lid. The filter lid is pretty tall as are some of the other aftermarket 14" metal lids. A different air cleaner lid (like the one on the car now) might have made the 8007 viable. The Barracuda hoodlines might be a little lower to the engines than some other models??? That's not a subject I know much about.
I did on my '67 barracuda with a Holley 4150. Don't recall off hand which aircleaners I checked it with. Some will provide a little more clearance because the threaded rod and wing nut are down low in the lid center. A carter type 4 bbl may gain another 1/4" or so
YMMV
edit: My measurements on the 8007 were
with a 4150 and an aircleaner that was 3.7" tall, there was 1/8 to the hood. (Check with clay)
The air cleaner may have been a K&N base and filter lid. The filter lid is pretty tall as are some of the other aftermarket 14" metal lids. A different air cleaner lid (like the one on the car now) might have made the 8007 viable. The Barracuda hoodlines might be a little lower to the engines than some other models??? That's not a subject I know much about.
