Can't seem to get a pedal

inertia said

Rear Brake Caliper Adjustment. To adjust initially, the piston is adjusted outward by turning the nut on the lever or by cranking the lever. This ratchets the caliper piston outward just like using the emergency brake would do. This moves the piston outward taking up that distance between the rotor and the pads.

Rear Brake Caliper Adjustment

Click to expand...

Update:

I re bled the rears, with a helper pumping.ore air did come out. However, the stopping power of the brakes whole the car was in stands didn't change.

I can't figure out how to adjust the parking brake on these calipers (they are different than the ones in the link) I did actuate the parking brake lever about 2 dozen times, before we started bleeding, though.

I decided to out the car on the ground and see how the brakes performed at a rolling idle. I set chalks in front of the wheels (in case I had nothing) and the car stopped fine. No granted that could be due to the front brakes.

The car needs an alignment, so I'll probably just have my guy check over the brakes as well.