Let me give a little more information. A portion of the time the relay acts just fine (no draw), then when the relay is moved (wiggled back and forth) you can hear it arcing within the relay. So the relay works fine part of the time. the internals are what is crap with the relay. I can throw another relay in there, and it might work fine for a little bit (don't know), but it will fail again. It is absolutely set up correctly, just wanted to know if anyone has replaced this piece with a Painless Wiring fuse block, a different relay that you have had luck with it working, or any other fix from someone that has replaced it with something different.