Last one to post in this thread wins!

diymirage said

Been trying to fix a pressure washer for a buddy

He claimed someone overfiled the oil in it and it stopped running

So I drained the oil back to proper level, cleaned the carb and it ran for about 10 minutes

Then it died again and won't start now

Click to expand...

I'd pull the float bowl off and check for dirt in the holes in the centre bolt. You might want to clean the gas tank out. Wash out with hot soapy water and then dry it out by stuffing paper towel in there and move around with a long screwdriver. Once installed get some Methyl Hydrate (Isopropanol) put an ounce in the tank and fill it up with Premium gas (always use premium in your small engine, less or no E-85)
Let it sit for a couple of minutes to let the gas run through to the float bowel. Should fire right up.